publicImage/gprMax
1
0
派生 0
镜像自地址 https://gitee.com/sunhf/gprMax.git 已同步 2025-08-07 04:56:51 +08:00
代码 工单 软件包 项目 版本发布 百科 动态

Updated bounds checking for sources and receivers.

浏览代码
这个提交包含在：
Craig Warren
2015-12-22 16:55:26 +00:00
父节点 c256136829
当前提交 15560144a8
共有 1 个文件被更改，包括 44 次插入 和 20 次删除
下载 Patch 文件 下载 Diff 文件 展开所有文件 折叠所有文件

64
gprMax/input_cmds_multiuse.py
查看文件

@@ -76,12 +76,14 @@ def process_multicmds(multicmds, G):
positiony = rvalue(float(tmp[2])/G.dy)
positionz = rvalue(float(tmp[3])/G.dz)
resistance = float(tmp[4])
if positionx < 0 or positionx > G.nx:
if positionx < 0 or positionx >= G.nx:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' x-coordinate is not within the model domain')
if positiony < 0 or positiony > G.ny:
if positiony < 0 or positiony >= G.ny:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' y-coordinate is not within the model domain')
if positionz < 0 or positionz > G.nz:
if positionz < 0 or positionz >= G.nz:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' z-coordinate is not within the model domain')
if positionx <= G.pmlthickness[0] or positionx >= G.nx - G.pmlthickness[3] or positiony <= G.pmlthickness[1] or positiony >= G.ny - G.pmlthickness[4] or positionz <= G.pmlthickness[2] or positionz >= G.nz - G.pmlthickness[5]:
print("WARNING: '" + cmdname + ': ' + ' '.join(tmp) + "'" + ' sources and receivers should not normally be positioned within the PML.')
if resistance < 0:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' requires a source resistance of zero or greater')
@@ -137,12 +139,14 @@ def process_multicmds(multicmds, G):
positionx = rvalue(float(tmp[1])/G.dx)
positiony = rvalue(float(tmp[2])/G.dy)
positionz = rvalue(float(tmp[3])/G.dz)
if positionx < 0 or positionx > G.nx:
if positionx < 0 or positionx >= G.nx:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' x-coordinate is not within the model domain')
if positiony < 0 or positiony > G.ny:
if positiony < 0 or positiony >= G.ny:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' y-coordinate is not within the model domain')
if positionz < 0 or positionz > G.nz:
if positionz < 0 or positionz >= G.nz:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' z-coordinate is not within the model domain')
if positionx <= G.pmlthickness[0] or positionx >= G.nx - G.pmlthickness[3] or positiony <= G.pmlthickness[1] or positiony >= G.ny - G.pmlthickness[4] or positionz <= G.pmlthickness[2] or positionz >= G.nz - G.pmlthickness[5]:
print("WARNING: '" + cmdname + ': ' + ' '.join(tmp) + "'" + ' sources and receivers should not normally be positioned within the PML.')
# Check if there is a waveformID in the waveforms list
if not any(x.ID == tmp[4] for x in G.waveforms):
@@ -195,12 +199,14 @@ def process_multicmds(multicmds, G):
positionx = rvalue(float(tmp[1])/G.dx)
positiony = rvalue(float(tmp[2])/G.dy)
positionz = rvalue(float(tmp[3])/G.dz)
if positionx < 0 or positionx > G.nx:
if positionx < 0 or positionx >= G.nx:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' x-coordinate is not within the model domain')
if positiony < 0 or positiony > G.ny:
if positiony < 0 or positiony >= G.ny:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' y-coordinate is not within the model domain')
if positionz < 0 or positionz > G.nz:
if positionz < 0 or positionz >= G.nz:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' z-coordinate is not within the model domain')
if positionx <= G.pmlthickness[0] or positionx >= G.nx - G.pmlthickness[3] or positiony <= G.pmlthickness[1] or positiony >= G.ny - G.pmlthickness[4] or positionz <= G.pmlthickness[2] or positionz >= G.nz - G.pmlthickness[5]:
print("WARNING: '" + cmdname + ': ' + ' '.join(tmp) + "'" + ' sources and receivers should not normally be positioned within the PML.')
# Check if there is a waveformID in the waveforms list
if not any(x.ID == tmp[4] for x in G.waveforms):
@@ -251,12 +257,14 @@ def process_multicmds(multicmds, G):
positionx = rvalue(float(tmp[0])/G.dx)
positiony = rvalue(float(tmp[1])/G.dy)
positionz = rvalue(float(tmp[2])/G.dz)
if positionx < 0 or positionx > G.nx:
if positionx < 0 or positionx >= G.nx:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' x-coordinate is not within the model domain')
if positiony < 0 or positiony > G.ny:
if positiony < 0 or positiony >= G.ny:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' y-coordinate is not within the model domain')
if positionz < 0 or positionz > G.nz:
if positionz < 0 or positionz >= G.nz:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' z-coordinate is not within the model domain')
if positionx <= G.pmlthickness[0] or positionx >= G.nx - G.pmlthickness[3] or positiony <= G.pmlthickness[1] or positiony >= G.ny - G.pmlthickness[4] or positionz <= G.pmlthickness[2] or positionz >= G.nz - G.pmlthickness[5]:
print("WARNING: '" + cmdname + ': ' + ' '.join(tmp) + "'" + ' sources and receivers should not normally be positioned within the PML.')
r = Rx(positionx=positionx, positiony=positiony, positionz=positionz)
@@ -296,18 +304,20 @@ def process_multicmds(multicmds, G):
dy = rvalue(float(tmp[7])/G.dy)
dz = rvalue(float(tmp[8])/G.dz)
if xs < 0 or xs > G.nx:
if xs < 0 or xs >= G.nx:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' the lower x-coordinate {} is not within the model domain'.format(xs))
if xf < 0 or xf > G.nx:
if xf < 0 or xf >= G.nx:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' the upper x-coordinate {} is not within the model domain'.format(xf))
if ys < 0 or ys > G.ny:
if ys < 0 or ys >= G.ny:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' the lower y-coordinate {} is not within the model domain'.format(ys))
if yf < 0 or yf > G.ny:
if yf < 0 or yf >= G.ny:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' the upper y-coordinate {} is not within the model domain'.format(yf))
if zs < 0 or zs > G.nz:
if zs < 0 or zs >= G.nz:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' the lower z-coordinate {} is not within the model domain'.format(zs))
if zf < 0 or zf > G.nz:
if zf < 0 or zf >= G.nz:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' the upper z-coordinate {} is not within the model domain'.format(zf))
if positionx <= G.pmlthickness[0] or positionx >= G.nx - G.pmlthickness[3] or positiony <= G.pmlthickness[1] or positiony >= G.ny - G.pmlthickness[4] or positionz <= G.pmlthickness[2] or positionz >= G.nz - G.pmlthickness[5]:
print("WARNING: '" + cmdname + ': ' + ' '.join(tmp) + "'" + ' sources and receivers should not normally be positioned within the PML.')
if xs >= xf or ys >= yf or zs >= zf:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' the lower coordinates should be less than the upper coordinates')
if dx < 0 or dy < 0 or dz < 0:
@@ -352,7 +362,21 @@ def process_multicmds(multicmds, G):
# If number of iterations given
else:
time = int(tmp[9])
if xs < 0 or xs >= G.nx:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' the lower x-coordinate {} is not within the model domain'.format(xs * G.dx))
if xf < 0 or xf >= G.nx:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' the upper x-coordinate {} is not within the model domain'.format(xf * G.dx))
if ys < 0 or ys >= G.ny:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' the lower y-coordinate {} is not within the model domain'.format(ys * G.dy))
if yf < 0 or yf >= G.ny:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' the upper y-coordinate {} is not within the model domain'.format(yf * G.dy))
if zs < 0 or zs >= G.nz:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' the lower z-coordinate {} is not within the model domain'.format(zs * G.dz))
if zf < 0 or zf >= G.nz:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' the upper z-coordinate {} is not within the model domain'.format(zf * G.dz))
if xs >= xf or ys >= yf or zs >= zf:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' the lower coordinates should be less than the upper coordinates')
if dx < 0 or dy < 0 or dz < 0:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' the step size should not be less than zero')
if dx < G.dx or dy < G.dy or dz < G.dz:
@@ -644,7 +668,7 @@ def process_multicmds(multicmds, G):
cfs.sigma = cfssigma
if G.messages:
print('CFS parameters: alpha (scaling: {}, scaling direction: {}, min: {:.2f}, max: {:.2f}), kappa (scaling: {}, scaling direction: {}, min: {:.2f}, max: {:.2f}), sigma (scaling: {}, scaling direction: {}, min: {:.2f}, max: {:.2f}) created.'.format(cfsalpha.scalingprofile, cfsalpha.scalingdirection, cfsalpha.min, cfsalpha.max, cfskappa.scalingprofile, cfskappa.scalingdirection, cfskappa.min, cfskappa.max, cfssigma.scalingprofile, cfssigma.scalingdirection, cfssigma.min, cfssigma.max))
print('PML CFS parameters: alpha (scaling: {}, scaling direction: {}, min: {:.2f}, max: {:.2f}), kappa (scaling: {}, scaling direction: {}, min: {:.2f}, max: {:.2f}), sigma (scaling: {}, scaling direction: {}, min: {:.2f}, max: {:.2f}) created.'.format(cfsalpha.scalingprofile, cfsalpha.scalingdirection, cfsalpha.min, cfsalpha.max, cfskappa.scalingprofile, cfskappa.scalingdirection, cfskappa.min, cfskappa.max, cfssigma.scalingprofile, cfssigma.scalingdirection, cfssigma.min, cfssigma.max))
G.cfs.append(cfs)