publicImage/gprMax
1
0
派生 0
镜像自地址 https://gitee.com/sunhf/gprMax.git 已同步 2025-08-07 04:56:51 +08:00
代码 工单 软件包 项目 版本发布 百科 动态

Adding text on example model.

浏览代码
这个提交包含在：
Craig Warren
2016-05-04 11:06:58 +01:00
父节点 c80b7ab441
当前提交 fd9cca5ffd
共有 1 个文件被更改，包括 3 次插入 和 1 次删除
下载 Patch 文件 下载 Diff 文件 展开所有文件 折叠所有文件

4
docs/source/user_libs_opt_taguchi.rst
查看文件

@@ -93,10 +93,12 @@ The package requires ``#python`` and ``#end_python`` to be used in the input fil
Example
-------
The following example demonstrates using the Taguchi optimisation process to optimise values of loading resistors used in a bowtie antenna. The bowtie design features 3 slots in each arm of the bowtie where loading resistors are placed, and a substrate with a perimittivity of 4.8 is used. The antenna is modelled in free space, and an output point (the electric field value) is specified at a distance of 60 mm from the feed of the bowtie.
The following example demonstrates using the Taguchi optimisation process to optimise values of loading resistors used in a bowtie antenna.
.. figure:: images/user_libs/antenna_bowtie_opt.png
:width: 600 px
FDTD geometry mesh showing bowtie antenna with slots and loading resistors.
The bowtie design features 3 slots in each arm of the bowtie where 3 different values of loading resistors are placed. In each slot there are 4 resistors of the same value, and each resistor is modelled as two parallel edges of a cell. The bowtie is placed on a lossless substrate that has a perimittivity of 4.8. The antenna is modelled in free space, and an output point (the electric field value) is specified at a distance of 60 mm from the feed of the bowtie (red coloured cell).