publicImage/gprMax
1
0
派生 0
镜像自地址 https://gitee.com/sunhf/gprMax.git 已同步 2025-08-07 23:14:03 +08:00
代码 工单 软件包 项目 版本发布 百科 动态

Added a pre-commit config file and reformatted all the files accordingly by using it.

浏览代码
这个提交包含在：
Sai-Suraj-27
2023-06-26 16:09:39 +05:30
父节点 c71e87e34f
当前提交 f9dd7f2420
共有 155 个文件被更改，包括 11383 次插入 和 8802 次删除
下载 Patch 文件 下载 Diff 文件 展开所有文件 折叠所有文件

1326
toolboxes/GPRAntennaModels/GSSI.py
查看文件

文件差异内容过多而无法显示 加载差异

821
toolboxes/GPRAntennaModels/MALA.py
查看文件

@@ -26,7 +26,7 @@ def antenna_like_MALA_1200(x, y, z, resolution=0.001, **kwargs):
centre of the antenna in the x-y plane and the
bottom of the antenna skid in the z direction.
resolution (float): Spatial resolution for the antenna model.
kwargs (dict): Optional variables, e.g. can be fed from an optimisation
kwargs (dict): Optional variables, e.g. can be fed from an optimisation
process.
Returns:
@@ -50,10 +50,10 @@ def antenna_like_MALA_1200(x, y, z, resolution=0.001, **kwargs):
# If using parameters from an optimisation
try:
kwargs
excitationfreq = kwargs['excitationfreq']
sourceresistance = kwargs['sourceresistance']
absorberEr = kwargs['absorberEr']
absorbersig = kwargs['absorbersig']
excitationfreq = kwargs["excitationfreq"]
sourceresistance = kwargs["sourceresistance"]
absorberEr = kwargs["absorberEr"]
absorbersig = kwargs["absorbersig"]
# Otherwise choose pre-set optimised parameters
except:
@@ -84,7 +84,7 @@ def antenna_like_MALA_1200(x, y, z, resolution=0.001, **kwargs):
bowtieheight = 0.024
tx = x + 0.062, y + 0.052, z + skidthickness
else:
logger.exception('This antenna module can only be used with a spatial resolution of 1mm or 2mm')
logger.exception("This antenna module can only be used with a spatial resolution of 1mm or 2mm")
raise ValueError
# SMD resistors - 3 on each Tx & Rx bowtie arm
@@ -100,382 +100,573 @@ def antenna_like_MALA_1200(x, y, z, resolution=0.001, **kwargs):
rxsiglower = ((1 / rxrescelllower) * (dy / (dx * dz))) / 2 # Divide by number of parallel edges per resistor
# Material definitions
absorber = gprMax.Material(er=absorberEr, se=absorbersig, mr=1, sm=0, id='absorber')
pcb = gprMax.Material(er=3, se=0, mr=1, sm=0, id='pcb')
hdpe = gprMax.Material(er=2.35, se=0, mr=1, sm=0, id='hdpe')
polypropylene = gprMax.Material(er=2.26, se=0, mr=1, sm=0, id='polypropylene')
txreslower = gprMax.Material(er=3, se=txsiglower, mr=1, sm=0, id='txreslower')
txresupper = gprMax.Material(er=3, se=txsigupper, mr=1, sm=0, id='txresupper')
rxreslower = gprMax.Material(er=3, se=rxsiglower, mr=1, sm=0, id='rxreslower')
rxresupper = gprMax.Material(er=3, se=rxsigupper, mr=1, sm=0, id='rxresupper')
scene_objects.extend((absorber, pcb, hdpe, polypropylene, txreslower, txresupper,
rxreslower, rxresupper))
absorber = gprMax.Material(er=absorberEr, se=absorbersig, mr=1, sm=0, id="absorber")
pcb = gprMax.Material(er=3, se=0, mr=1, sm=0, id="pcb")
hdpe = gprMax.Material(er=2.35, se=0, mr=1, sm=0, id="hdpe")
polypropylene = gprMax.Material(er=2.26, se=0, mr=1, sm=0, id="polypropylene")
txreslower = gprMax.Material(er=3, se=txsiglower, mr=1, sm=0, id="txreslower")
txresupper = gprMax.Material(er=3, se=txsigupper, mr=1, sm=0, id="txresupper")
rxreslower = gprMax.Material(er=3, se=rxsiglower, mr=1, sm=0, id="rxreslower")
rxresupper = gprMax.Material(er=3, se=rxsigupper, mr=1, sm=0, id="rxresupper")
scene_objects.extend((absorber, pcb, hdpe, polypropylene, txreslower, txresupper, rxreslower, rxresupper))
# Antenna geometry
# Shield - metallic enclosure
b1 = gprMax.Box(p1=(x, y, z + skidthickness),
p2=(x + casesize[0], y + casesize[1], z + skidthickness + casesize[2]),
material_id='pec')
b2 = gprMax.Box(p1=(x + 0.020, y + casethickness, z + skidthickness),
p2=(x + 0.100, y + casesize[1] - casethickness,
z + skidthickness + casethickness), material_id='free_space')
b3 = gprMax.Box(p1=(x + 0.100, y + casethickness, z + skidthickness),
p2=(x + casesize[0] - casethickness, y + casesize[1] - casethickness,
z + skidthickness + casethickness), material_id='free_space')
b1 = gprMax.Box(
p1=(x, y, z + skidthickness),
p2=(x + casesize[0], y + casesize[1], z + skidthickness + casesize[2]),
material_id="pec",
)
b2 = gprMax.Box(
p1=(x + 0.020, y + casethickness, z + skidthickness),
p2=(x + 0.100, y + casesize[1] - casethickness, z + skidthickness + casethickness),
material_id="free_space",
)
b3 = gprMax.Box(
p1=(x + 0.100, y + casethickness, z + skidthickness),
p2=(x + casesize[0] - casethickness, y + casesize[1] - casethickness, z + skidthickness + casethickness),
material_id="free_space",
)
# Absorber material
b4 = gprMax.Box(p1=(x + 0.020, y + casethickness, z + skidthickness),
p2=(x + 0.100, y + casesize[1] - casethickness,
z + skidthickness + casesize[2] - casethickness),
material_id='absorber')
b5 = gprMax.Box(p1=(x + 0.100, y + casethickness, z + skidthickness),
p2=(x + casesize[0] - casethickness, y + casesize[1] - casethickness,
z + skidthickness + casesize[2] - casethickness),
material_id='absorber')
b4 = gprMax.Box(
p1=(x + 0.020, y + casethickness, z + skidthickness),
p2=(x + 0.100, y + casesize[1] - casethickness, z + skidthickness + casesize[2] - casethickness),
material_id="absorber",
)
b5 = gprMax.Box(
p1=(x + 0.100, y + casethickness, z + skidthickness),
p2=(
x + casesize[0] - casethickness,
y + casesize[1] - casethickness,
z + skidthickness + casesize[2] - casethickness,
),
material_id="absorber",
)
scene_objects.extend((b1, b2, b3, b4, b5))
# Shield - cylindrical sections
c1 = gprMax.Cylinder(p1=(x + 0.055, y + casesize[1] - 0.008, z + skidthickness),
p2=(x + 0.055, y + casesize[1] - 0.008,
z + skidthickness + casesize[2] - casethickness),
r=0.008, material_id='pec')
c2 = gprMax.Cylinder(p1=(x + 0.055, y + 0.008, z + skidthickness),
p2=(x + 0.055, y + 0.008,
z + skidthickness + casesize[2] - casethickness),
r=0.008, material_id='pec')
c3 = gprMax.Cylinder(p1=(x + 0.147, y + casesize[1] - 0.008, z + skidthickness),
p2=(x + 0.147, y + casesize[1] - 0.008,
z + skidthickness + casesize[2] - casethickness),
r=0.008, material_id='pec')
c4 = gprMax.Cylinder(p1=(x + 0.147, y + 0.008, z + skidthickness),
p2=(x + 0.147, y + 0.008,
z + skidthickness + casesize[2] - casethickness),
r=0.008, material_id='pec')
c5 = gprMax.Cylinder(p1=(x + 0.055, y + casesize[1] - 0.008, z + skidthickness),
p2=(x + 0.055, y + casesize[1] - 0.008,
z + skidthickness + casesize[2] - casethickness),
r=0.007, material_id='free_space')
c6 = gprMax.Cylinder(p1=(x + 0.055, y + 0.008, z + skidthickness),
p2=(x + 0.055, y + 0.008,
z + skidthickness + casesize[2] - casethickness),
r=0.007, material_id='free_space')
c7 = gprMax.Cylinder(p1=(x + 0.147, y + casesize[1] - 0.008, z + skidthickness),
p2=(x + 0.147, y + casesize[1] - 0.008,
z + skidthickness + casesize[2] - casethickness),
r=0.007, material_id='free_space')
c8 = gprMax.Cylinder(p1=(x + 0.147, y + 0.008, z + skidthickness),
p2=(x + 0.147, y + 0.008,
z + skidthickness + casesize[2] - casethickness),
r=0.007, material_id='free_space')
b6 = gprMax.Box(p1=(x + 0.054, y + casesize[1] - 0.016, z + skidthickness),
p2=(x + 0.056, y + casesize[1] - 0.014,
z + skidthickness + casesize[2] - casethickness),
material_id='free_space')
b7 = gprMax.Box(p1=(x + 0.054, y + 0.014, z + skidthickness),
p2=(x + 0.056, y + 0.016,
z + skidthickness + casesize[2] - casethickness),
material_id='free_space')
b8 = gprMax.Box(p1=(x + 0.146, y + casesize[1] - 0.016, z + skidthickness),
p2=(x + 0.148, y + casesize[1] - 0.014,
z + skidthickness + casesize[2] - casethickness),
material_id='free_space')
b9 = gprMax.Box(p1=(x + 0.146, y + 0.014, z + skidthickness),
p2=(x + 0.148, y + 0.016,
z + skidthickness + casesize[2] - casethickness),
material_id='free_space')
c1 = gprMax.Cylinder(
p1=(x + 0.055, y + casesize[1] - 0.008, z + skidthickness),
p2=(x + 0.055, y + casesize[1] - 0.008, z + skidthickness + casesize[2] - casethickness),
r=0.008,
material_id="pec",
)
c2 = gprMax.Cylinder(
p1=(x + 0.055, y + 0.008, z + skidthickness),
p2=(x + 0.055, y + 0.008, z + skidthickness + casesize[2] - casethickness),
r=0.008,
material_id="pec",
)
c3 = gprMax.Cylinder(
p1=(x + 0.147, y + casesize[1] - 0.008, z + skidthickness),
p2=(x + 0.147, y + casesize[1] - 0.008, z + skidthickness + casesize[2] - casethickness),
r=0.008,
material_id="pec",
)
c4 = gprMax.Cylinder(
p1=(x + 0.147, y + 0.008, z + skidthickness),
p2=(x + 0.147, y + 0.008, z + skidthickness + casesize[2] - casethickness),
r=0.008,
material_id="pec",
)
c5 = gprMax.Cylinder(
p1=(x + 0.055, y + casesize[1] - 0.008, z + skidthickness),
p2=(x + 0.055, y + casesize[1] - 0.008, z + skidthickness + casesize[2] - casethickness),
r=0.007,
material_id="free_space",
)
c6 = gprMax.Cylinder(
p1=(x + 0.055, y + 0.008, z + skidthickness),
p2=(x + 0.055, y + 0.008, z + skidthickness + casesize[2] - casethickness),
r=0.007,
material_id="free_space",
)
c7 = gprMax.Cylinder(
p1=(x + 0.147, y + casesize[1] - 0.008, z + skidthickness),
p2=(x + 0.147, y + casesize[1] - 0.008, z + skidthickness + casesize[2] - casethickness),
r=0.007,
material_id="free_space",
)
c8 = gprMax.Cylinder(
p1=(x + 0.147, y + 0.008, z + skidthickness),
p2=(x + 0.147, y + 0.008, z + skidthickness + casesize[2] - casethickness),
r=0.007,
material_id="free_space",
)
b6 = gprMax.Box(
p1=(x + 0.054, y + casesize[1] - 0.016, z + skidthickness),
p2=(x + 0.056, y + casesize[1] - 0.014, z + skidthickness + casesize[2] - casethickness),
material_id="free_space",
)
b7 = gprMax.Box(
p1=(x + 0.054, y + 0.014, z + skidthickness),
p2=(x + 0.056, y + 0.016, z + skidthickness + casesize[2] - casethickness),
material_id="free_space",
)
b8 = gprMax.Box(
p1=(x + 0.146, y + casesize[1] - 0.016, z + skidthickness),
p2=(x + 0.148, y + casesize[1] - 0.014, z + skidthickness + casesize[2] - casethickness),
material_id="free_space",
)
b9 = gprMax.Box(
p1=(x + 0.146, y + 0.014, z + skidthickness),
p2=(x + 0.148, y + 0.016, z + skidthickness + casesize[2] - casethickness),
material_id="free_space",
)
scene_objects.extend((c1, c2, c3, c4, c5, c6, c7, c8, b6, b7, b8, b9))
# PCB
b10 = gprMax.Box(p1=(x + 0.020, y + 0.018, z + skidthickness),
p2=(x + casesize[0] - casethickness, y + casesize[1] - 0.018,
z + skidthickness + pcbthickness), material_id='pcb')
b10 = gprMax.Box(
p1=(x + 0.020, y + 0.018, z + skidthickness),
p2=(x + casesize[0] - casethickness, y + casesize[1] - 0.018, z + skidthickness + pcbthickness),
material_id="pcb",
)
# Shield - Tx & Rx cavities
b11 = gprMax.Box(p1=(x + 0.032, y + 0.022, z + skidthickness),
p2=(x + 0.032 + cavitysize[0], y + 0.022 + cavitysize[1],
z + skidthickness + cavitysize[2]), material_id='pec')
b12 = gprMax.Box(p1=(x + 0.032 + cavitythickness, y + 0.022 + cavitythickness,
z + skidthickness), p2=(x + 0.032 + cavitysize[0] - cavitythickness,
y + 0.022 + cavitysize[1] - cavitythickness,
z + skidthickness + cavitysize[2]), material_id='absorber')
b13 = gprMax.Box(p1=(x + 0.108, y + 0.022, z + skidthickness),
p2=(x + 0.108 + cavitysize[0], y + 0.022 + cavitysize[1],
z + skidthickness + cavitysize[2]), material_id='pec')
b14 = gprMax.Box(p1=(x + 0.108 + cavitythickness, y + 0.022 + cavitythickness,
z + skidthickness), p2=(x + 0.108 + cavitysize[0] - cavitythickness,
y + 0.022 + cavitysize[1] - cavitythickness,
z + skidthickness + cavitysize[2]), material_id='free_space')
b11 = gprMax.Box(
p1=(x + 0.032, y + 0.022, z + skidthickness),
p2=(x + 0.032 + cavitysize[0], y + 0.022 + cavitysize[1], z + skidthickness + cavitysize[2]),
material_id="pec",
)
b12 = gprMax.Box(
p1=(x + 0.032 + cavitythickness, y + 0.022 + cavitythickness, z + skidthickness),
p2=(
x + 0.032 + cavitysize[0] - cavitythickness,
y + 0.022 + cavitysize[1] - cavitythickness,
z + skidthickness + cavitysize[2],
),
material_id="absorber",
)
b13 = gprMax.Box(
p1=(x + 0.108, y + 0.022, z + skidthickness),
p2=(x + 0.108 + cavitysize[0], y + 0.022 + cavitysize[1], z + skidthickness + cavitysize[2]),
material_id="pec",
)
b14 = gprMax.Box(
p1=(x + 0.108 + cavitythickness, y + 0.022 + cavitythickness, z + skidthickness),
p2=(
x + 0.108 + cavitysize[0] - cavitythickness,
y + 0.022 + cavitysize[1] - cavitythickness,
z + skidthickness + cavitysize[2],
),
material_id="free_space",
)
# Shield - Tx & Rx cavities - joining strips
b15 = gprMax.Box(p1=(x + 0.032 + cavitysize[0], y + 0.022 + cavitysize[1] - 0.006,
z + skidthickness + cavitysize[2] - casethickness),
p2=(x + 0.108, y + 0.022 + cavitysize[1],
z + skidthickness + cavitysize[2]), material_id='pec')
b16 = gprMax.Box(p1=(x + 0.032 + cavitysize[0], y + 0.022,
z + skidthickness + cavitysize[2] - casethickness),
p2=(x + 0.108, y + 0.022 + 0.006,
z + skidthickness + cavitysize[2]), material_id='pec')
b15 = gprMax.Box(
p1=(
x + 0.032 + cavitysize[0],
y + 0.022 + cavitysize[1] - 0.006,
z + skidthickness + cavitysize[2] - casethickness,
),
p2=(x + 0.108, y + 0.022 + cavitysize[1], z + skidthickness + cavitysize[2]),
material_id="pec",
)
b16 = gprMax.Box(
p1=(x + 0.032 + cavitysize[0], y + 0.022, z + skidthickness + cavitysize[2] - casethickness),
p2=(x + 0.108, y + 0.022 + 0.006, z + skidthickness + cavitysize[2]),
material_id="pec",
)
# PCB - replace bits chopped by TX & Rx cavities
b17 = gprMax.Box(p1=(x + 0.032 + cavitythickness, y + 0.022 + cavitythickness,
z + skidthickness), p2=(x + 0.032 + cavitysize[0] - cavitythickness,
y + 0.022 + cavitysize[1] - cavitythickness,
z + skidthickness + pcbthickness), material_id='pcb')
b18 = gprMax.Box(p1=(x + 0.108 + cavitythickness, y + 0.022 + cavitythickness,
z + skidthickness), p2=(x + 0.108 + cavitysize[0] - cavitythickness,
y + 0.022 + cavitysize[1] - cavitythickness,
z + skidthickness + pcbthickness), material_id='pcb')
b17 = gprMax.Box(
p1=(x + 0.032 + cavitythickness, y + 0.022 + cavitythickness, z + skidthickness),
p2=(
x + 0.032 + cavitysize[0] - cavitythickness,
y + 0.022 + cavitysize[1] - cavitythickness,
z + skidthickness + pcbthickness,
),
material_id="pcb",
)
b18 = gprMax.Box(
p1=(x + 0.108 + cavitythickness, y + 0.022 + cavitythickness, z + skidthickness),
p2=(
x + 0.108 + cavitysize[0] - cavitythickness,
y + 0.022 + cavitysize[1] - cavitythickness,
z + skidthickness + pcbthickness,
),
material_id="pcb",
)
scene_objects.extend((b10, b11, b12, b13, b14, b15, b16, b17, b18))
# PCB components
# Tx bowtie
if resolution == 0.001:
t1 = gprMax.Triangle(p1=(tx[0], tx[1] - 0.001, tx[2]),
p2=(tx[0] - 0.026, tx[1] - bowtieheight - 0.001, tx[2]),
p3=(tx[0] + 0.026, tx[1] - bowtieheight - 0.001, tx[2]),
thickness=0, material_id='pec')
e1 = gprMax.Edge(p1=(tx[0], tx[1] - 0.001, tx[2]),
p2=(tx[0], tx[1], tx[2]), material_id='pec')
t2 = gprMax.Triangle(p1=(tx[0], tx[1] + 0.002, tx[2]),
p2=(tx[0] - 0.026, tx[1] + bowtieheight + 0.002, tx[2]),
p3=(tx[0] + 0.026, tx[1] + bowtieheight + 0.002, tx[2]),
thickness=0, material_id='pec')
e2 = gprMax.Edge(p1=(tx[0], tx[1] + 0.001, tx[2]),
p2=(tx[0], tx[1] + 0.002, tx[2]), material_id='pec')
t1 = gprMax.Triangle(
p1=(tx[0], tx[1] - 0.001, tx[2]),
p2=(tx[0] - 0.026, tx[1] - bowtieheight - 0.001, tx[2]),
p3=(tx[0] + 0.026, tx[1] - bowtieheight - 0.001, tx[2]),
thickness=0,
material_id="pec",
)
e1 = gprMax.Edge(p1=(tx[0], tx[1] - 0.001, tx[2]), p2=(tx[0], tx[1], tx[2]), material_id="pec")
t2 = gprMax.Triangle(
p1=(tx[0], tx[1] + 0.002, tx[2]),
p2=(tx[0] - 0.026, tx[1] + bowtieheight + 0.002, tx[2]),
p3=(tx[0] + 0.026, tx[1] + bowtieheight + 0.002, tx[2]),
thickness=0,
material_id="pec",
)
e2 = gprMax.Edge(p1=(tx[0], tx[1] + 0.001, tx[2]), p2=(tx[0], tx[1] + 0.002, tx[2]), material_id="pec")
scene_objects.extend((t1, t2, e1, e2))
elif resolution == 0.002:
t1 = gprMax.Triangle(p1=(tx[0], tx[1], tx[2]),
p2=(tx[0] - 0.026, tx[1] - bowtieheight, tx[2]),
p3=(tx[0] + 0.026, tx[1] - bowtieheight, tx[2]),
thickness=0, material_id='pec')
t2 = gprMax.Triangle(p1=(tx[0], tx[1] + 0.002, tx[2]),
p2=(tx[0] - 0.026, tx[1] + bowtieheight + 0.002, tx[2]),
p3=(tx[0] + 0.026, tx[1] + bowtieheight + 0.002, tx[2]),
thickness=0, material_id='pec')
t1 = gprMax.Triangle(
p1=(tx[0], tx[1], tx[2]),
p2=(tx[0] - 0.026, tx[1] - bowtieheight, tx[2]),
p3=(tx[0] + 0.026, tx[1] - bowtieheight, tx[2]),
thickness=0,
material_id="pec",
)
t2 = gprMax.Triangle(
p1=(tx[0], tx[1] + 0.002, tx[2]),
p2=(tx[0] - 0.026, tx[1] + bowtieheight + 0.002, tx[2]),
p3=(tx[0] + 0.026, tx[1] + bowtieheight + 0.002, tx[2]),
thickness=0,
material_id="pec",
)
scene_objects.extend((t1, t2))
# Rx bowtie
if resolution == 0.001:
t3 = gprMax.Triangle(p1=(tx[0] + 0.076, tx[1] - 0.001, tx[2]),
p2=(tx[0] + 0.076 - 0.026, tx[1] - bowtieheight - 0.001, tx[2]),
p3=(tx[0] + 0.076 + 0.026, tx[1] - bowtieheight - 0.001, tx[2]),
thickness=0, material_id='pec')
e3 = gprMax.Edge(p1=(tx[0] + 0.076, tx[1] - 0.001, tx[2]),
p2=(tx[0] + 0.076, tx[1], tx[2]), material_id='pec')
t4 = gprMax.Triangle(p1=(tx[0] + 0.076, tx[1] + 0.002, tx[2]),
p2=(tx[0] + 0.076 - 0.026, tx[1] + bowtieheight + 0.002, tx[2]),
p3=(tx[0] + 0.076 + 0.026, tx[1] + bowtieheight + 0.002, tx[2]),
thickness=0, material_id='pec')
e4 = gprMax.Edge(p1=(tx[0] + 0.076, tx[1] + 0.001, tx[2]),
p2=(tx[0] + 0.076, tx[1] + 0.002, tx[2]), material_id='pec')
t3 = gprMax.Triangle(
p1=(tx[0] + 0.076, tx[1] - 0.001, tx[2]),
p2=(tx[0] + 0.076 - 0.026, tx[1] - bowtieheight - 0.001, tx[2]),
p3=(tx[0] + 0.076 + 0.026, tx[1] - bowtieheight - 0.001, tx[2]),
thickness=0,
material_id="pec",
)
e3 = gprMax.Edge(p1=(tx[0] + 0.076, tx[1] - 0.001, tx[2]), p2=(tx[0] + 0.076, tx[1], tx[2]), material_id="pec")
t4 = gprMax.Triangle(
p1=(tx[0] + 0.076, tx[1] + 0.002, tx[2]),
p2=(tx[0] + 0.076 - 0.026, tx[1] + bowtieheight + 0.002, tx[2]),
p3=(tx[0] + 0.076 + 0.026, tx[1] + bowtieheight + 0.002, tx[2]),
thickness=0,
material_id="pec",
)
e4 = gprMax.Edge(
p1=(tx[0] + 0.076, tx[1] + 0.001, tx[2]), p2=(tx[0] + 0.076, tx[1] + 0.002, tx[2]), material_id="pec"
)
scene_objects.extend((t3, e3, t4, e4))
elif resolution == 0.002:
t3 = gprMax.Triangle(p1=(tx[0] + 0.076, tx[1], tx[2]),
p2=(tx[0] + 0.076 - 0.026, tx[1] - bowtieheight, tx[2]),
p3=(tx[0] + 0.076 + 0.026, tx[1] - bowtieheight, tx[2]),
thickness=0, material_id='pec')
t4 = gprMax.Triangle(p1=(tx[0] + 0.076, tx[1] + 0.002, tx[2]),
p2=(tx[0] + 0.076 - 0.026, tx[1] + bowtieheight + 0.002, tx[2]),
p3=(tx[0] + 0.076 + 0.026, tx[1] + bowtieheight + 0.002, tx[2]),
thickness=0, material_id='pec')
t3 = gprMax.Triangle(
p1=(tx[0] + 0.076, tx[1], tx[2]),
p2=(tx[0] + 0.076 - 0.026, tx[1] - bowtieheight, tx[2]),
p3=(tx[0] + 0.076 + 0.026, tx[1] - bowtieheight, tx[2]),
thickness=0,
material_id="pec",
)
t4 = gprMax.Triangle(
p1=(tx[0] + 0.076, tx[1] + 0.002, tx[2]),
p2=(tx[0] + 0.076 - 0.026, tx[1] + bowtieheight + 0.002, tx[2]),
p3=(tx[0] + 0.076 + 0.026, tx[1] + bowtieheight + 0.002, tx[2]),
thickness=0,
material_id="pec",
)
scene_objects.extend((t3, t4))
# Tx surface mount resistors (lower y coordinate)
if resolution == 0.001:
e5 = gprMax.Edge(p1=(tx[0] - 0.023, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] - 0.023, tx[1] - bowtieheight - dy, tx[2]),
material_id='txreslower')
e6 = gprMax.Edge(p1=(tx[0] - 0.023 + dx, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] - 0.023 + dx, tx[1] - bowtieheight - dy, tx[2]),
material_id='txreslower')
e7 = gprMax.Edge(p1=(tx[0], tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0], tx[1] - bowtieheight - dy, tx[2]),
material_id='txreslower')
e8 = gprMax.Edge(p1=(tx[0] + dx, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + dx, tx[1] - bowtieheight - dy, tx[2]),
material_id='txreslower')
e9 = gprMax.Edge(p1=(tx[0] + 0.022, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + 0.022, tx[1] - bowtieheight - dy, tx[2]),
material_id='txreslower')
e10 = gprMax.Edge(p1=(tx[0] + 0.022 + dx, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + 0.022 + dx, tx[1] - bowtieheight - dy, tx[2]),
material_id='txreslower')
e5 = gprMax.Edge(
p1=(tx[0] - 0.023, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] - 0.023, tx[1] - bowtieheight - dy, tx[2]),
material_id="txreslower",
)
e6 = gprMax.Edge(
p1=(tx[0] - 0.023 + dx, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] - 0.023 + dx, tx[1] - bowtieheight - dy, tx[2]),
material_id="txreslower",
)
e7 = gprMax.Edge(
p1=(tx[0], tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0], tx[1] - bowtieheight - dy, tx[2]),
material_id="txreslower",
)
e8 = gprMax.Edge(
p1=(tx[0] + dx, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + dx, tx[1] - bowtieheight - dy, tx[2]),
material_id="txreslower",
)
e9 = gprMax.Edge(
p1=(tx[0] + 0.022, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + 0.022, tx[1] - bowtieheight - dy, tx[2]),
material_id="txreslower",
)
e10 = gprMax.Edge(
p1=(tx[0] + 0.022 + dx, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + 0.022 + dx, tx[1] - bowtieheight - dy, tx[2]),
material_id="txreslower",
)
scene_objects.extend((e5, e6, e7, e8, e9, e10))
elif resolution == 0.002:
e5 = gprMax.Edge(p1=(tx[0] - 0.023, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] - 0.023, tx[1] - bowtieheight, tx[2]),
material_id='txreslower')
e6 = gprMax.Edge(p1=(tx[0] - 0.023 + dx, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] - 0.023 + dx, tx[1] - bowtieheight, tx[2]),
material_id='txreslower')
e7 = gprMax.Edge(p1=(tx[0], tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0], tx[1] - bowtieheight, tx[2]),
material_id='txreslower')
e8 = gprMax.Edge(p1=(tx[0] + dx, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + dx, tx[1] - bowtieheight, tx[2]),
material_id='txreslower')
e9 = gprMax.Edge(p1=(tx[0] + 0.020, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + 0.020, tx[1] - bowtieheight, tx[2]),
material_id='txreslower')
e10 = gprMax.Edge(p1=(tx[0] + 0.020 + dx, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + 0.020 + dx, tx[1] - bowtieheight, tx[2]),
material_id='txreslower')
e5 = gprMax.Edge(
p1=(tx[0] - 0.023, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] - 0.023, tx[1] - bowtieheight, tx[2]),
material_id="txreslower",
)
e6 = gprMax.Edge(
p1=(tx[0] - 0.023 + dx, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] - 0.023 + dx, tx[1] - bowtieheight, tx[2]),
material_id="txreslower",
)
e7 = gprMax.Edge(
p1=(tx[0], tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0], tx[1] - bowtieheight, tx[2]),
material_id="txreslower",
)
e8 = gprMax.Edge(
p1=(tx[0] + dx, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + dx, tx[1] - bowtieheight, tx[2]),
material_id="txreslower",
)
e9 = gprMax.Edge(
p1=(tx[0] + 0.020, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + 0.020, tx[1] - bowtieheight, tx[2]),
material_id="txreslower",
)
e10 = gprMax.Edge(
p1=(tx[0] + 0.020 + dx, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + 0.020 + dx, tx[1] - bowtieheight, tx[2]),
material_id="txreslower",
)
scene_objects.extend((e5, e6, e7, e8, e9, e10))
# Tx surface mount resistors (upper y coordinate)
if resolution == 0.001:
e11 = gprMax.Edge(p1=(tx[0] - 0.023, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] - 0.023, tx[1] + bowtieheight + 0.006, tx[2]),
material_id='txresupper')
e12 = gprMax.Edge(p1=(tx[0] - 0.023 + dx, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] - 0.023 + dx, tx[1] + bowtieheight + 0.006, tx[2]),
material_id='txresupper')
e13 = gprMax.Edge(p1=(tx[0], tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0], tx[1] + bowtieheight + 0.006, tx[2]),
material_id='txresupper')
e14 = gprMax.Edge(p1=(tx[0] + dx, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + dx, tx[1] + bowtieheight + 0.006, tx[2]),
material_id='txresupper')
e15 = gprMax.Edge(p1=(tx[0] + 0.022, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + 0.022, tx[1] + bowtieheight + 0.006, tx[2]),
material_id='txresupper')
e16 = gprMax.Edge(p1=(tx[0] + 0.022 + dx, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + 0.022 + dx, tx[1] + bowtieheight + 0.006, tx[2]),
material_id='txresupper')
e11 = gprMax.Edge(
p1=(tx[0] - 0.023, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] - 0.023, tx[1] + bowtieheight + 0.006, tx[2]),
material_id="txresupper",
)
e12 = gprMax.Edge(
p1=(tx[0] - 0.023 + dx, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] - 0.023 + dx, tx[1] + bowtieheight + 0.006, tx[2]),
material_id="txresupper",
)
e13 = gprMax.Edge(
p1=(tx[0], tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0], tx[1] + bowtieheight + 0.006, tx[2]),
material_id="txresupper",
)
e14 = gprMax.Edge(
p1=(tx[0] + dx, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + dx, tx[1] + bowtieheight + 0.006, tx[2]),
material_id="txresupper",
)
e15 = gprMax.Edge(
p1=(tx[0] + 0.022, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + 0.022, tx[1] + bowtieheight + 0.006, tx[2]),
material_id="txresupper",
)
e16 = gprMax.Edge(
p1=(tx[0] + 0.022 + dx, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + 0.022 + dx, tx[1] + bowtieheight + 0.006, tx[2]),
material_id="txresupper",
)
scene_objects.extend((e11, e12, e13, e14, e15, e16))
elif resolution == 0.002:
e11 = gprMax.Edge(p1=(tx[0] - 0.023, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] - 0.023, tx[1] + bowtieheight + 0.006, tx[2]),
material_id='txresupper')
e12 = gprMax.Edge(p1=(tx[0] - 0.023 + dx, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] - 0.023 + dx, tx[1] + bowtieheight + 0.006, tx[2]),
material_id='txresupper')
e13 = gprMax.Edge(p1=(tx[0], tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0], tx[1] + bowtieheight + 0.006, tx[2]),
material_id='txresupper')
e14 = gprMax.Edge(p1=(tx[0] + dx, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + dx, tx[1] + bowtieheight + 0.006, tx[2]),
material_id='txresupper')
e15 = gprMax.Edge(p1=(tx[0] + 0.020, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + 0.020, tx[1] + bowtieheight + 0.006, tx[2]),
material_id='txresupper')
e16 = gprMax.Edge(p1=(tx[0] + 0.020 + dx, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + 0.020 + dx, tx[1] + bowtieheight + 0.006, tx[2]),
material_id='txresupper')
e11 = gprMax.Edge(
p1=(tx[0] - 0.023, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] - 0.023, tx[1] + bowtieheight + 0.006, tx[2]),
material_id="txresupper",
)
e12 = gprMax.Edge(
p1=(tx[0] - 0.023 + dx, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] - 0.023 + dx, tx[1] + bowtieheight + 0.006, tx[2]),
material_id="txresupper",
)
e13 = gprMax.Edge(
p1=(tx[0], tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0], tx[1] + bowtieheight + 0.006, tx[2]),
material_id="txresupper",
)
e14 = gprMax.Edge(
p1=(tx[0] + dx, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + dx, tx[1] + bowtieheight + 0.006, tx[2]),
material_id="txresupper",
)
e15 = gprMax.Edge(
p1=(tx[0] + 0.020, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + 0.020, tx[1] + bowtieheight + 0.006, tx[2]),
material_id="txresupper",
)
e16 = gprMax.Edge(
p1=(tx[0] + 0.020 + dx, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + 0.020 + dx, tx[1] + bowtieheight + 0.006, tx[2]),
material_id="txresupper",
)
scene_objects.extend((e11, e12, e13, e14, e15, e16))
# Rx surface mount resistors (lower y coordinate)
if resolution == 0.001:
e17 = gprMax.Edge(p1=(tx[0] - 0.023 + 0.076, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] - 0.023 + 0.076, tx[1] - bowtieheight - dy, tx[2]),
material_id='rxreslower')
e18 = gprMax.Edge(p1=(tx[0] - 0.023 + dx + 0.076, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] - 0.023 + dx + 0.076, tx[1] - bowtieheight - dy, tx[2]),
material_id='rxreslower')
e19 = gprMax.Edge(p1=(tx[0] + 0.076, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + 0.076, tx[1] - bowtieheight - dy, tx[2]),
material_id='rxreslower')
e20 = gprMax.Edge(p1=(tx[0] + dx + 0.076, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + dx + 0.076, tx[1] - bowtieheight - dy, tx[2]),
material_id='rxreslower')
e21 = gprMax.Edge(p1=(tx[0] + 0.022 + 0.076, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + 0.022 + 0.076, tx[1] - bowtieheight - dy, tx[2]),
material_id='rxreslower')
e22 = gprMax.Edge(p1=(tx[0] + 0.022 + dx + 0.076, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + 0.022 + dx + 0.076, tx[1] - bowtieheight - dy, tx[2]),
material_id='rxreslower')
e17 = gprMax.Edge(
p1=(tx[0] - 0.023 + 0.076, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] - 0.023 + 0.076, tx[1] - bowtieheight - dy, tx[2]),
material_id="rxreslower",
)
e18 = gprMax.Edge(
p1=(tx[0] - 0.023 + dx + 0.076, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] - 0.023 + dx + 0.076, tx[1] - bowtieheight - dy, tx[2]),
material_id="rxreslower",
)
e19 = gprMax.Edge(
p1=(tx[0] + 0.076, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + 0.076, tx[1] - bowtieheight - dy, tx[2]),
material_id="rxreslower",
)
e20 = gprMax.Edge(
p1=(tx[0] + dx + 0.076, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + dx + 0.076, tx[1] - bowtieheight - dy, tx[2]),
material_id="rxreslower",
)
e21 = gprMax.Edge(
p1=(tx[0] + 0.022 + 0.076, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + 0.022 + 0.076, tx[1] - bowtieheight - dy, tx[2]),
material_id="rxreslower",
)
e22 = gprMax.Edge(
p1=(tx[0] + 0.022 + dx + 0.076, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + 0.022 + dx + 0.076, tx[1] - bowtieheight - dy, tx[2]),
material_id="rxreslower",
)
scene_objects.extend((e17, e18, e19, e20, e21, e22))
elif resolution == 0.002:
e17 = gprMax.Edge(p1=(tx[0] - 0.023 + 0.076, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] - 0.023 + 0.076, tx[1] - bowtieheight, tx[2]),
material_id='rxreslower')
e18 = gprMax.Edge(p1=(tx[0] - 0.023 + dx + 0.076, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] - 0.023 + dx + 0.076, tx[1] - bowtieheight, tx[2]),
material_id='rxreslower')
e19 = gprMax.Edge(p1=(tx[0] + 0.076, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + 0.076, tx[1] - bowtieheight, tx[2]),
material_id='rxreslower')
e20 = gprMax.Edge(p1=(tx[0] + dx + 0.076, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + dx + 0.076, tx[1] - bowtieheight, tx[2]),
material_id='rxreslower')
e21 = gprMax.Edge(p1=(tx[0] + 0.020 + 0.076, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + 0.020 + 0.076, tx[1] - bowtieheight, tx[2]),
material_id='rxreslower')
e22 = gprMax.Edge(p1=(tx[0] + 0.020 + dx + 0.076, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + 0.020 + dx + 0.076, tx[1] - bowtieheight, tx[2]),
material_id='rxreslower')
e17 = gprMax.Edge(
p1=(tx[0] - 0.023 + 0.076, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] - 0.023 + 0.076, tx[1] - bowtieheight, tx[2]),
material_id="rxreslower",
)
e18 = gprMax.Edge(
p1=(tx[0] - 0.023 + dx + 0.076, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] - 0.023 + dx + 0.076, tx[1] - bowtieheight, tx[2]),
material_id="rxreslower",
)
e19 = gprMax.Edge(
p1=(tx[0] + 0.076, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + 0.076, tx[1] - bowtieheight, tx[2]),
material_id="rxreslower",
)
e20 = gprMax.Edge(
p1=(tx[0] + dx + 0.076, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + dx + 0.076, tx[1] - bowtieheight, tx[2]),
material_id="rxreslower",
)
e21 = gprMax.Edge(
p1=(tx[0] + 0.020 + 0.076, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + 0.020 + 0.076, tx[1] - bowtieheight, tx[2]),
material_id="rxreslower",
)
e22 = gprMax.Edge(
p1=(tx[0] + 0.020 + dx + 0.076, tx[1] - bowtieheight - 0.004, tx[2]),
p2=(tx[0] + 0.020 + dx + 0.076, tx[1] - bowtieheight, tx[2]),
material_id="rxreslower",
)
scene_objects.extend((e17, e18, e19, e20, e21, e22))
# Rx surface mount resistors (upper y coordinate)
if resolution == 0.001:
e23 = gprMax.Edge(p1=(tx[0] - 0.023 + 0.076, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] - 0.023 + 0.076, tx[1] + bowtieheight + 0.006, tx[2]),
material_id='rxresupper')
e24 = gprMax.Edge(p1=(tx[0] - 0.023 + dx + 0.076, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] - 0.023 + dx + 0.076, tx[1] + bowtieheight + 0.006, tx[2]),
material_id='rxresupper')
e25 = gprMax.Edge(p1=(tx[0] + 0.076, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + 0.076, tx[1] + bowtieheight + 0.006, tx[2]),
material_id='rxresupper')
e26 = gprMax.Edge(p1=(tx[0] + dx + 0.076, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + dx + 0.076, tx[1] + bowtieheight + 0.006, tx[2]),
material_id='rxresupper')
e27 = gprMax.Edge(p1=(tx[0] + 0.022 + 0.076, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + 0.022 + 0.076, tx[1] + bowtieheight + 0.006, tx[2]),
material_id='rxresupper')
e28 = gprMax.Edge(p1=(tx[0] + 0.022 + dx + 0.076, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + 0.022 + dx + 0.076, tx[1] + bowtieheight + 0.006, tx[2]),
material_id='rxresupper')
e23 = gprMax.Edge(
p1=(tx[0] - 0.023 + 0.076, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] - 0.023 + 0.076, tx[1] + bowtieheight + 0.006, tx[2]),
material_id="rxresupper",
)
e24 = gprMax.Edge(
p1=(tx[0] - 0.023 + dx + 0.076, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] - 0.023 + dx + 0.076, tx[1] + bowtieheight + 0.006, tx[2]),
material_id="rxresupper",
)
e25 = gprMax.Edge(
p1=(tx[0] + 0.076, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + 0.076, tx[1] + bowtieheight + 0.006, tx[2]),
material_id="rxresupper",
)
e26 = gprMax.Edge(
p1=(tx[0] + dx + 0.076, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + dx + 0.076, tx[1] + bowtieheight + 0.006, tx[2]),
material_id="rxresupper",
)
e27 = gprMax.Edge(
p1=(tx[0] + 0.022 + 0.076, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + 0.022 + 0.076, tx[1] + bowtieheight + 0.006, tx[2]),
material_id="rxresupper",
)
e28 = gprMax.Edge(
p1=(tx[0] + 0.022 + dx + 0.076, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + 0.022 + dx + 0.076, tx[1] + bowtieheight + 0.006, tx[2]),
material_id="rxresupper",
)
scene_objects.extend((e23, e24, e25, e26, e27, e28))
elif resolution == 0.002:
e23 = gprMax.Edge(p1=(tx[0] - 0.023 + 0.076, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] - 0.023 + 0.076, tx[1] + bowtieheight + 0.006, tx[2]),
material_id='rxresupper')
e24 = gprMax.Edge(p1=(tx[0] - 0.023 + dx + 0.076, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] - 0.023 + dx + 0.076, tx[1] + bowtieheight + 0.006, tx[2]),
material_id='rxresupper')
e25 = gprMax.Edge(p1=(tx[0] + 0.076, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + 0.076, tx[1] + bowtieheight + 0.006, tx[2]),
material_id='rxresupper')
e26 = gprMax.Edge(p1=(tx[0] + dx + 0.076, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + dx + 0.076, tx[1] + bowtieheight + 0.006, tx[2]),
material_id='rxresupper')
e27 = gprMax.Edge(p1=(tx[0] + 0.020 + 0.076, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + 0.020 + 0.076, tx[1] + bowtieheight + 0.006, tx[2]),
material_id='rxresupper')
e28 = gprMax.Edge(p1=(tx[0] + 0.020 + dx + 0.076, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + 0.020 + dx + 0.076, tx[1] + bowtieheight + 0.006, tx[2]),
material_id='rxresupper')
e23 = gprMax.Edge(
p1=(tx[0] - 0.023 + 0.076, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] - 0.023 + 0.076, tx[1] + bowtieheight + 0.006, tx[2]),
material_id="rxresupper",
)
e24 = gprMax.Edge(
p1=(tx[0] - 0.023 + dx + 0.076, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] - 0.023 + dx + 0.076, tx[1] + bowtieheight + 0.006, tx[2]),
material_id="rxresupper",
)
e25 = gprMax.Edge(
p1=(tx[0] + 0.076, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + 0.076, tx[1] + bowtieheight + 0.006, tx[2]),
material_id="rxresupper",
)
e26 = gprMax.Edge(
p1=(tx[0] + dx + 0.076, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + dx + 0.076, tx[1] + bowtieheight + 0.006, tx[2]),
material_id="rxresupper",
)
e27 = gprMax.Edge(
p1=(tx[0] + 0.020 + 0.076, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + 0.020 + 0.076, tx[1] + bowtieheight + 0.006, tx[2]),
material_id="rxresupper",
)
e28 = gprMax.Edge(
p1=(tx[0] + 0.020 + dx + 0.076, tx[1] + bowtieheight + 0.002, tx[2]),
p2=(tx[0] + 0.020 + dx + 0.076, tx[1] + bowtieheight + 0.006, tx[2]),
material_id="rxresupper",
)
scene_objects.extend((e23, e24, e25, e26, e27, e28))
# Skid
b19 = gprMax.Box(p1=(x, y, z), p2=(x + casesize[0], y + casesize[1],
z + polypropylenethickness), material_id='polypropylene')
b20 = gprMax.Box(p1=(x, y, z + polypropylenethickness),
p2=(x + casesize[0], y + casesize[1],
z + polypropylenethickness + hdpethickness),
material_id='hdpe')
b19 = gprMax.Box(
p1=(x, y, z), p2=(x + casesize[0], y + casesize[1], z + polypropylenethickness), material_id="polypropylene"
)
b20 = gprMax.Box(
p1=(x, y, z + polypropylenethickness),
p2=(x + casesize[0], y + casesize[1], z + polypropylenethickness + hdpethickness),
material_id="hdpe",
)
scene_objects.extend((b19, b20))
# Excitation
w2 = gprMax.Waveform(wave_type='gaussian', amp=1, freq=excitationfreq, id='my_gaussian')
w2 = gprMax.Waveform(wave_type="gaussian", amp=1, freq=excitationfreq, id="my_gaussian")
scene_objects.append(w2)
vs1 = gprMax.VoltageSource(polarisation='y', p1=(tx[0], tx[1], tx[2]),
resistance=sourceresistance, waveform_id='my_gaussian')
vs1 = gprMax.VoltageSource(
polarisation="y", p1=(tx[0], tx[1], tx[2]), resistance=sourceresistance, waveform_id="my_gaussian"
)
scene_objects.append(vs1)
# Output point - receiver bowtie
r1 = gprMax.Rx(p1=(tx[0] + 0.076, tx[1], tx[2]), id='rxbowtie', outputs='Ey')
r1 = gprMax.Rx(p1=(tx[0] + 0.076, tx[1], tx[2]), id="rxbowtie", outputs="Ey")
scene_objects.append(r1)
# Geometry views
gv1 = gprMax.GeometryView(p1=(x - dx, y - dy, z - dz), p2=(x + casesize[0] + dx,
y + casesize[1] + dy, z + skidthickness + casesize[2] + dz),
dl=(dx, dy, dz), filename='antenna_like_MALA_1200',
output_type='n')
gv2 = gprMax.GeometryView(p1=(x, y, z), p2=(x + casesize[0], y + casesize[1], z + 0.010),
dl=(dx, dy, dz), filename='antenna_like_MALA_1200_pcb',
output_type='f')
gv1 = gprMax.GeometryView(
p1=(x - dx, y - dy, z - dz),
p2=(x + casesize[0] + dx, y + casesize[1] + dy, z + skidthickness + casesize[2] + dz),
dl=(dx, dy, dz),
filename="antenna_like_MALA_1200",
output_type="n",
)
gv2 = gprMax.GeometryView(
p1=(x, y, z),
p2=(x + casesize[0], y + casesize[1], z + 0.010),
dl=(dx, dy, dz),
filename="antenna_like_MALA_1200_pcb",
output_type="f",
)
# scene_objects.extend((gv1, gv2))
return scene_objects

4
toolboxes/GPRAntennaModels/README.rst
查看文件

@@ -53,11 +53,11 @@ To include an antenna model similar to a GSSI 1.5 GHz antenna at a location 0.12
from toolboxes.GPRAntennaModels.GSSI import antenna_like_GSSI_1500
scene = gprMax.Scene()
# Import antenna model and add to model
dl = 0.002
ant_pos = (0.125, 0.094, 0.100)
gssi_objects = antenna_like_GSSI_1500(ant_pos[0], ant_pos[1], ant_pos[2],
gssi_objects = antenna_like_GSSI_1500(ant_pos[0], ant_pos[1], ant_pos[2],
resolution=dl)
for obj in gssi_objects:
# Rotate antenna model if desired