publicImage/gprMax
1
0
派生 0
镜像自地址 https://gitee.com/sunhf/gprMax.git 已同步 2025-08-07 15:10:13 +08:00
代码 工单 软件包 项目 版本发布 百科 动态

Tweaks to formatting of warning messages.

浏览代码
这个提交包含在：
Craig Warren
2016-08-17 10:39:20 +01:00
父节点 4236dcf134
当前提交 f2109f6708
共有 1 个文件被更改，包括 9 次插入 和 9 次删除
下载 Patch 文件 下载 Diff 文件 展开所有文件 折叠所有文件

18
gprMax/input_cmds_multiuse.py
查看文件

@@ -69,7 +69,7 @@ def process_multicmds(multicmds, G):
w.freq = float(tmp[2]) w.freq = float(tmp[2])
if G.messages: if G.messages:
print('Waveform {} of type {} with amplitude {:g}, frequency {:g}Hz created.'.format(w.ID, w.type, w.amp, w.freq)) print('Waveform {} of type {} with maximum amplitude scaling {:g}, frequency {:g}Hz created.'.format(w.ID, w.type, w.amp, w.freq))
G.waveforms.append(w) G.waveforms.append(w)
@@ -90,7 +90,7 @@ def process_multicmds(multicmds, G):
resistance = float(tmp[4]) resistance = float(tmp[4])
check_coordinates(xcoord, ycoord, zcoord) check_coordinates(xcoord, ycoord, zcoord)
if xcoord < G.pmlthickness[0] or xcoord > G.nx - G.pmlthickness[3] or ycoord < G.pmlthickness[1] or ycoord > G.ny - G.pmlthickness[4] or zcoord < G.pmlthickness[2] or zcoord > G.nz - G.pmlthickness[5]: if xcoord < G.pmlthickness[0] or xcoord > G.nx - G.pmlthickness[3] or ycoord < G.pmlthickness[1] or ycoord > G.ny - G.pmlthickness[4] or zcoord < G.pmlthickness[2] or zcoord > G.nz - G.pmlthickness[5]:
print(Fore.RED + "WARNING: '" + cmdname + ': ' + ' '.join(tmp) + "'" + ' sources and receivers should not normally be positioned within the PML.\n' + Style.RESET_ALL) print(Fore.RED + "WARNING: '" + cmdname + ': ' + ' '.join(tmp) + "'" + ' sources and receivers should not normally be positioned within the PML.' + Style.RESET_ALL)
if resistance < 0: if resistance < 0:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' requires a source resistance of zero or greater') raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' requires a source resistance of zero or greater')
@@ -149,7 +149,7 @@ def process_multicmds(multicmds, G):
zcoord = G.calculate_coord('z', tmp[3]) zcoord = G.calculate_coord('z', tmp[3])
check_coordinates(xcoord, ycoord, zcoord) check_coordinates(xcoord, ycoord, zcoord)
if xcoord < G.pmlthickness[0] or xcoord > G.nx - G.pmlthickness[3] or ycoord < G.pmlthickness[1] or ycoord > G.ny - G.pmlthickness[4] or zcoord < G.pmlthickness[2] or zcoord > G.nz - G.pmlthickness[5]: if xcoord < G.pmlthickness[0] or xcoord > G.nx - G.pmlthickness[3] or ycoord < G.pmlthickness[1] or ycoord > G.ny - G.pmlthickness[4] or zcoord < G.pmlthickness[2] or zcoord > G.nz - G.pmlthickness[5]:
print(Fore.RED + "WARNING: '" + cmdname + ': ' + ' '.join(tmp) + "'" + ' sources and receivers should not normally be positioned within the PML.\n' + Style.RESET_ALL) print(Fore.RED + "WARNING: '" + cmdname + ': ' + ' '.join(tmp) + "'" + ' sources and receivers should not normally be positioned within the PML.' + Style.RESET_ALL)
# Check if there is a waveformID in the waveforms list # Check if there is a waveformID in the waveforms list
if not any(x.ID == tmp[4] for x in G.waveforms): if not any(x.ID == tmp[4] for x in G.waveforms):
@@ -208,7 +208,7 @@ def process_multicmds(multicmds, G):
zcoord = G.calculate_coord('z', tmp[3]) zcoord = G.calculate_coord('z', tmp[3])
check_coordinates(xcoord, ycoord, zcoord) check_coordinates(xcoord, ycoord, zcoord)
if xcoord < G.pmlthickness[0] or xcoord > G.nx - G.pmlthickness[3] or ycoord < G.pmlthickness[1] or ycoord > G.ny - G.pmlthickness[4] or zcoord < G.pmlthickness[2] or zcoord > G.nz - G.pmlthickness[5]: if xcoord < G.pmlthickness[0] or xcoord > G.nx - G.pmlthickness[3] or ycoord < G.pmlthickness[1] or ycoord > G.ny - G.pmlthickness[4] or zcoord < G.pmlthickness[2] or zcoord > G.nz - G.pmlthickness[5]:
print(Fore.RED + "WARNING: '" + cmdname + ': ' + ' '.join(tmp) + "'" + ' sources and receivers should not normally be positioned within the PML.\n' + Style.RESET_ALL) print(Fore.RED + "WARNING: '" + cmdname + ': ' + ' '.join(tmp) + "'" + ' sources and receivers should not normally be positioned within the PML.' + Style.RESET_ALL)
# Check if there is a waveformID in the waveforms list # Check if there is a waveformID in the waveforms list
if not any(x.ID == tmp[4] for x in G.waveforms): if not any(x.ID == tmp[4] for x in G.waveforms):
@@ -271,7 +271,7 @@ def process_multicmds(multicmds, G):
check_coordinates(xcoord, ycoord, zcoord) check_coordinates(xcoord, ycoord, zcoord)
if xcoord < G.pmlthickness[0] or xcoord > G.nx - G.pmlthickness[3] or ycoord < G.pmlthickness[1] or ycoord > G.ny - G.pmlthickness[4] or zcoord < G.pmlthickness[2] or zcoord > G.nz - G.pmlthickness[5]: if xcoord < G.pmlthickness[0] or xcoord > G.nx - G.pmlthickness[3] or ycoord < G.pmlthickness[1] or ycoord > G.ny - G.pmlthickness[4] or zcoord < G.pmlthickness[2] or zcoord > G.nz - G.pmlthickness[5]:
print(Fore.RED + "WARNING: '" + cmdname + ': ' + ' '.join(tmp) + "'" + ' sources and receivers should not normally be positioned within the PML.\n' + Style.RESET_ALL) print(Fore.RED + "WARNING: '" + cmdname + ': ' + ' '.join(tmp) + "'" + ' sources and receivers should not normally be positioned within the PML.' + Style.RESET_ALL)
if resistance <= 0 or resistance >= z0: if resistance <= 0 or resistance >= z0:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' requires a resistance greater than zero and less than the impedance of free space, i.e. 376.73 Ohms') raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' requires a resistance greater than zero and less than the impedance of free space, i.e. 376.73 Ohms')
@@ -329,7 +329,7 @@ def process_multicmds(multicmds, G):
zcoord = round_value(float(tmp[2]) / G.dz) zcoord = round_value(float(tmp[2]) / G.dz)
check_coordinates(xcoord, ycoord, zcoord) check_coordinates(xcoord, ycoord, zcoord)
if xcoord < G.pmlthickness[0] or xcoord > G.nx - G.pmlthickness[3] or ycoord < G.pmlthickness[1] or ycoord > G.ny - G.pmlthickness[4] or zcoord < G.pmlthickness[2] or zcoord > G.nz - G.pmlthickness[5]: if xcoord < G.pmlthickness[0] or xcoord > G.nx - G.pmlthickness[3] or ycoord < G.pmlthickness[1] or ycoord > G.ny - G.pmlthickness[4] or zcoord < G.pmlthickness[2] or zcoord > G.nz - G.pmlthickness[5]:
print(Fore.RED + "WARNING: '" + cmdname + ': ' + ' '.join(tmp) + "'" + ' sources and receivers should not normally be positioned within the PML.\n' + Style.RESET_ALL) print(Fore.RED + "WARNING: '" + cmdname + ': ' + ' '.join(tmp) + "'" + ' sources and receivers should not normally be positioned within the PML.' + Style.RESET_ALL)
r = Rx() r = Rx()
r.xcoord = xcoord r.xcoord = xcoord
@@ -354,7 +354,7 @@ def process_multicmds(multicmds, G):
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' contains an output type that is not available') raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' contains an output type that is not available')
if G.messages: if G.messages:
print('Receiver at {:g}m, {:g}m, {:g}m with output(s) {} created.'.format(r.xcoord * G.dx, r.ycoord * G.dy, r.zcoord * G.dz, ', '.join(r.outputs))) print('Receiver at {:g}m, {:g}m, {:g}m with output component(s) {} created.'.format(r.xcoord * G.dx, r.ycoord * G.dy, r.zcoord * G.dz, ', '.join(r.outputs)))
G.rxs.append(r) G.rxs.append(r)
@@ -382,7 +382,7 @@ def process_multicmds(multicmds, G):
check_coordinates(xf, yf, zf, name='upper') check_coordinates(xf, yf, zf, name='upper')
if xcoord < G.pmlthickness[0] or xcoord > G.nx - G.pmlthickness[3] or ycoord < G.pmlthickness[1] or ycoord > G.ny - G.pmlthickness[4] or zcoord < G.pmlthickness[2] or zcoord > G.nz - G.pmlthickness[5]: if xcoord < G.pmlthickness[0] or xcoord > G.nx - G.pmlthickness[3] or ycoord < G.pmlthickness[1] or ycoord > G.ny - G.pmlthickness[4] or zcoord < G.pmlthickness[2] or zcoord > G.nz - G.pmlthickness[5]:
print(Fore.RED + "WARNING: '" + cmdname + ': ' + ' '.join(tmp) + "'" + ' sources and receivers should not normally be positioned within the PML.\n' + Style.RESET_ALL) print(Fore.RED + "WARNING: '" + cmdname + ': ' + ' '.join(tmp) + "'" + ' sources and receivers should not normally be positioned within the PML.' + Style.RESET_ALL)
if xs > xf or ys > yf or zs > zf: if xs > xf or ys > yf or zs > zf:
raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' the lower coordinates should be less than the upper coordinates') raise CmdInputError("'" + cmdname + ': ' + ' '.join(tmp) + "'" + ' the lower coordinates should be less than the upper coordinates')
if dx < 0 or dy < 0 or dz < 0: if dx < 0 or dy < 0 or dz < 0:
@@ -420,7 +420,7 @@ def process_multicmds(multicmds, G):
for key in Rx.availableoutputs: for key in Rx.availableoutputs:
r.outputs[key] = np.zeros(G.iterations, dtype=floattype) r.outputs[key] = np.zeros(G.iterations, dtype=floattype)
if G.messages: if G.messages:
print(' Receiver at {:g}m, {:g}m, {:g}m with output(s) {} created.'.format(r.xcoord * G.dx, r.ycoord * G.dy, r.zcoord * G.dz, ', '.join(r.outputs))) print(' Receiver at {:g}m, {:g}m, {:g}m with output component(s) {} created.'.format(r.xcoord * G.dx, r.ycoord * G.dy, r.zcoord * G.dz, ', '.join(r.outputs)))
G.rxs.append(r) G.rxs.append(r)
# Snapshot # Snapshot