openSource/tem3dfdtd-open
4
0
派生 0
代码 项目 活动

修正代码中的注释错误

浏览代码
这个提交包含在：
sunhf
2026-08-14 20:51:58 +08:00
父节点 5026369041
当前提交 89ff871b0b
共修改 46 个文件，包含 131 行新增和 131 行删除
下载 Patch 文件 下载 Diff 文件 展开所有文件 折叠所有文件
tem3dfdtd/example/ex1-halfspace/PML结果/TEM_decay_curve.png
二进制
查看文件
二进制文件未显示。
双排 滑动 叠加

之前

宽度:  |  高度:  |  大小: 444 KiB

之后

宽度:  |  高度:  |  大小: 781 KiB

tem3dfdtd/example/ex2-halfspacewithball/Dirichlet结果/TEM_decay_curve.png
二进制
查看文件
二进制文件未显示。
双排 滑动 叠加

之前

宽度:  |  高度:  |  大小: 574 KiB

之后

宽度:  |  高度:  |  大小: 1015 KiB

tem3dfdtd/example/ex2-halfspacewithball/PML结果/TEM_decay_curve.png
二进制
查看文件
二进制文件未显示。
双排 滑动 叠加

之前

宽度:  |  高度:  |  大小: 575 KiB

之后

宽度:  |  高度:  |  大小: 1020 KiB

tem3dfdtd/example/ex3-complexTerrain/Dirichlet结果/TEM_decay_curve.png
二进制
查看文件
二进制文件未显示。
双排 滑动 叠加

之前

宽度:  |  高度:  |  大小: 368 KiB

之后

宽度:  |  高度:  |  大小: 634 KiB

tem3dfdtd/lib/Anomalous_conformal.f90
+1 -1
查看文件
@@ -1,4 +1,4 @@
!Copyright (c) 2022 by LEEE under guide of Huaifeng Sun(sunhuaifeng@gmail.com)
!Copyright (c) 2022 by LEEE under guide of Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn)
!written by Xinyu Li(202335098@mail.sdu.edu.cn) and Qi Zhao(zhaoqi_326326@163.com)
SUBROUTINE anomalous_conformal
!This procedure is used to compute anomalous body conformal
tem3dfdtd/lib/CloseRecFiles.f90
+3 -3
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
!function description
!this suboutine is used to select and call some suboutine to close some
tem3dfdtd/lib/GetSourcePosition.f90
+3 -3
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
subroutine GetSourcePosition
! This subroutine initialize the value of array is_ex_in_source which is used when judging whether the grid contains the source
tem3dfdtd/lib/Get_Receiver_Gridlabel.f90
+1 -1
查看文件
@@ -1,4 +1,4 @@
!Copyright (c) 2022 by LEEE under guide of Huaifeng Sun(sunhuaifeng@gmail.com)
!Copyright (c) 2022 by LEEE under guide of Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn)
!written by Shangbin Liu(lsbin87@126.com)
SUBROUTINE Get_Receiver_Gridlabel
tem3dfdtd/lib/Iteration.f90
+3 -3
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
! --------------------------------Subroutine part---------------------------------------------!
subroutine Iteration_cpml
tem3dfdtd/lib/OpenRecFiles.f90
+3 -3
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
subroutine OpenRecFiles
! This subroutine opens all the files needed to record data of interests
tem3dfdtd/lib/SubCloseRecFiles.f90
+3 -3
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
subroutine SubCloseRecFiles(Flag)
use constantparameters
tem3dfdtd/lib/SubOpenRecFiles.f90
+4 -4
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
subroutine SubOpenRecFiles(Flag)
use constantparameters
@@ -72,7 +72,7 @@ subroutine SubOpenRecFiles(Flag)
end select
! ------------------------------------end of File name Distribution---------------------------------------------!
! --------------------------------------open file code-------------------------------------------!
! if the compiler reports the error: 'Too Many Open FIles!', you can come to tdem.org website and find the solutions.
! if the compiler reports the error: 'Too Many Open FIles!', you can come to https://git.em3d.cn/ website and find the solutions.
! -----------------------------------------------------------------------------------------------------!
do ii=1,NumRecHeights+1,1
do jj=1,NumRecLines,1
tem3dfdtd/lib/SubWriteRecFiles.f90
+3 -3
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
subroutine SubWriteRecFiles(Flag,num)
! This subroutine writes all the data of intersted recording points from different recording plane which are given in the input.dat file.
tem3dfdtd/lib/Terrain_conformal.f90
+1 -1
查看文件
@@ -1,4 +1,4 @@
!Copyright (c) 2022 by LEEE under guide of Huaifeng Sun(sunhuaifeng@gmail.com)
!Copyright (c) 2022 by LEEE under guide of Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn)
!written by Xinyu Li(202335098@mail.sdu.edu.cn) and Qi Zhao(zhaoqi_326326@163.com)
SUBROUTINE terrain_conformal
tem3dfdtd/lib/allocatememory.f90
+3 -3
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
!function description
!this subroutine is used to allocate dynamic memory to the selected array.
tem3dfdtd/lib/checkparameters.f90
+3 -3
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
!function description
!this suboutine is used to write out the readed calculation parameters for
tem3dfdtd/lib/close-additional-survey-points-files.f90
+3 -3
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
!function description
!this suboutine is used to close #5300 file.
tem3dfdtd/lib/free-memory.f90
+3 -3
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
SUBROUTINE FREE_MEMORY
USE CONSTANTPARAMETERS
tem3dfdtd/lib/get-eps-r.f90
+3 -3
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
subroutine Get_eps_r
use constantparameters
tem3dfdtd/lib/get-mstop.f90
+3 -3
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
subroutine Get_mstop
! if the value of plus is too small, it will cause array bounds exceeded because the array bonds of Mstop and Mstart is set to 10000.
tem3dfdtd/lib/get-pml-paramters.f90
+3 -3
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
subroutine Get_pml_parameters
use constantparameters
tem3dfdtd/lib/get-system-timedata.f90
+3 -3
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
!SUBROUTINE GET_SYS_TIMEDATA(OUTPUT)
! ! The original subroutien written by Huaifeng Sun can not work in PGI compiler, so I change it into what it looks like here.
tem3dfdtd/lib/get_coordinates.f90
+3 -3
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
SUBROUTINE GET_COORDINATES
!> @brief This subroutine calculates the coordinates of each grid node in the 3D domain,
tem3dfdtd/lib/get_non_uniformgrid.f90
+3 -3
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
SUBROUTINE GET_NON_UNIFORMGRID
USE CONSTANTPARAMETERS
tem3dfdtd/lib/getdata.f90
+3 -3
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
SUBROUTINE GETDATA
USE CONSTANTPARAMETERS
tem3dfdtd/lib/getxmldata.f90
+3 -3
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
!this subroutine is writen by Huaifeng Sun from May 29, 2017
subroutine getxmldata
tem3dfdtd/lib/memory-use-estimation.f90
+9 -9
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
SUBROUTINE MEMORY_USE_ESTIMATION
!This subroutine is written by Huaifeng Sun, and it has not been modified since the last ice age, so it can not reveal the real consumption of memory now.
@@ -11,17 +11,17 @@ SUBROUTINE MEMORY_USE_ESTIMATION
CHARACTER(LEN=40) XSTRING
INTEGER(KIND=1) CONTD
TUSE=0.0
TUSE=TUSE+NX*NYB*NZB+NXB*NY*NZB+NXB*NYB*NZ !电场E使用内存
TUSE=TUSE+NXB*NY*(NZ+1)+NX*NYB*(NZ+1)+NX*NY*NZB !磁场H使用内存
TUSE=TUSE+4*NY*NZB+4*NYB*NZ+NX*4*NZB+NXB*4*NZ+NX*NYB*4+NXB*NY*4 !边界条件使用内存
TUSE=TUSE+4*NY*NZB+4*NYB*NZ+NX*4*NZB+NXB*4*NZ+NX*NYB*4+NXB*NY*4 !边界条件使用内存
TUSE=TUSE+NXB*NYB*NZB !模型使用内存
TUSE=TUSE+NX*NYB*NZB+NXB*NY*NZB+NXB*NYB*NZ !�糡Eʹ���ڴ�
TUSE=TUSE+NXB*NY*(NZ+1)+NX*NYB*(NZ+1)+NX*NY*NZB !�ų�Hʹ���ڴ�
TUSE=TUSE+4*NY*NZB+4*NYB*NZ+NX*4*NZB+NXB*4*NZ+NX*NYB*4+NXB*NY*4 !�߽�����ʹ���ڴ�
TUSE=TUSE+4*NY*NZB+4*NYB*NZ+NX*4*NZB+NXB*4*NZ+NX*NYB*4+NXB*NY*4 !�߽�����ʹ���ڴ�
TUSE=TUSE+NXB*NYB*NZB !ģ��ʹ���ڴ�
TUSE=TUSE+NSTOP*2
TUSE=TUSE/1024
TUSE=TUSE/1024
TUSE=TUSE*16
WRITE (XSTRING,'(I40)') TUSE
XSTRING = 'At least '//TRIM(ADJUSTL(XSTRING))//'M memory is needed!' !拼接为要求的FORMAT格式
XSTRING = 'At least '//TRIM(ADJUSTL(XSTRING))//'M memory is needed!' !ƴ��ΪҪ���FORMAT��ʽ
XSTRING = TRIM(ADJUSTL(XSTRING))
WRITE(*,*)XSTRING
RETURN
tem3dfdtd/lib/resistivity-configuration.f90
+1 -1
查看文件
@@ -1,4 +1,4 @@
!Copyright (c) 2022 by LEEE under guide of Huaifeng Sun(sunhuaifeng@gmail.com)
!Copyright (c) 2022 by LEEE under guide of Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn)
!written by Xinyu Li(202335098@mail.sdu.edu.cn) and Qi Zhao(zhaoqi_326326@163.com)
SUBROUTINE RES_CONFIGURE
tem3dfdtd/lib/sin-source.f90
+4 -4
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
SUBROUTINE SIN_SOURCE
@@ -25,6 +25,6 @@ SUBROUTINE SIN_SOURCE
WRITE(9,'(3E24.16)')CTIME(I),DELT(I),SOURCE(I)
ENDDO
CLOSE(9)
WRITE(10005,*)'半正弦发射波形时间序列已经写入文件CTIME_SIN_SOURCE.DAT'
WRITE(10005,*)'�����ҷ��䲨��ʱ�������Ѿ�д���ļ�CTIME_SIN_SOURCE.DAT'
RETURN
ENDSUBROUTINE SIN_SOURCE
tem3dfdtd/lib/time-serious.f90
+8 -8
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
SUBROUTINE TIME_SERIOUS
USE CONSTANTPARAMETERS
@@ -8,7 +8,7 @@ SUBROUTINE TIME_SERIOUS
USE RES_MODEL_PARAMETER
USE TIME_PARAMETER
USE OMP_LIB
!本子程序将计算初始时间和时间序列
!���ӳ��򽫼����ʼʱ���ʱ������
IMPLICIT NONE
INTEGER NSTOP_TEMP,i,j,k
TIME_MAX=100*GridSize*SQRT(EPS0*MU0/3.0) !Time_max can be set to larger value if the value of GridSize if less than 1m, otherwise you will spend a much longer time in calculation.
@@ -42,22 +42,22 @@ SUBROUTINE TIME_SERIOUS
ENDDO !This subroutine computes the value of Nstop which satisfies the requirement of Max_off_time
IF(NSTOP_TEMP .LT. NSTOP)THEN
NSTOP=NSTOP_TEMP !Change the value of Nstop to a smaller value according to the above computation
WRITE(10005,*)'NSTOP改变为',NSTOP
WRITE(10005,*)'NSTOP�ı�Ϊ',NSTOP
OPEN(9,FILE='CTIME_TIXING_UPCOS.DAT',STATUS='UNKNOWN')
DO I=1,NSTOP
WRITE(9,'(3E24.16)')CTIME(I),DELT(I),SOURCE(I)
ENDDO
CLOSE(9)
WRITE(10005,*)'采用升余弦函数和降余弦函数处理的梯形波发射波形时间序列已经写入文件CTIME_TIXING_UPCOS.DAT'
WRITE(10005,*)'���������Һ����ͽ����Һ������������β����䲨��ʱ�������Ѿ�д���ļ�CTIME_TIXING_UPCOS.DAT'
ELSEIF(NSTOP_TEMP .EQ. NSTOP)THEN
NSTOP=NSTOP_TEMP
WRITE(10005,*)'NSTOP没有改变，可能无法满足最大最大延时设置，请重新设置NSTOP.'
WRITE(10005,*)'NSTOPû�иı䣬�����޷�������������ʱ���ã�����������NSTOP.'
OPEN(9,FILE='CTIME_TIXING_UPCOS.DAT',STATUS='UNKNOWN')
DO I=1,NSTOP
WRITE(9,'(3E24.16)')CTIME(I),DELT(I),SOURCE(I)
ENDDO
CLOSE(9)
WRITE(10005,*)'采用升余弦函数和降余弦函数处理的梯形波发射波形时间序列已经写入文件CTIME_TIXING_UPCOS.DAT'
WRITE(10005,*)'���������Һ����ͽ����Һ������������β����䲨��ʱ�������Ѿ�д���ļ�CTIME_TIXING_UPCOS.DAT'
ELSE
WRITE(10005,*)'The number of iteration steps exceeds the range given in the input.dat, please change it. now the Nstop value is determined by Max_off_time.'
print*,'The number of iteration steps exceeds the range given in the input.dat, please change it. now the Nstop value is determined by Max_off_time.'
tem3dfdtd/lib/tixing-source-upcos.f90
+7 -7
查看文件
@@ -1,8 +1,8 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
!梯形波电流激发，采用升余弦开关函数和降余弦开关函数
!���β��������������������ҿ��غ����ͽ����ҿ��غ���
SUBROUTINE TIXING_SOURCE_UPCOS
USE CONSTANTPARAMETERS
USE ELECTROMAGNETIC_VARIABLES
@@ -20,16 +20,16 @@ SUBROUTINE TIXING_SOURCE_UPCOS
SOURCE(1)=AMP*0.5*(1-COS(PI*CTIME(1)/RAISETIME)) !AMP*CTIME(1)/RAISETIME
DO I=2,NSTOP
CTIME(I)=CTIME(I-1)+DELT(I-1)
IF(CTIME(I) .LT. RAISETIME)THEN !小于raistime
IF(CTIME(I) .LT. RAISETIME)THEN !��raistime
DELT(I)=RAISESTEP
SOURCE(I)=AMP*0.5*(1-COS(PI*CTIME(I)/RAISETIME)) !AMP*CTIME(I)/RAISETIME
ELSEIF(CTIME(I) .GE. RAISETIME .AND. CTIME(I) .LT. RAISETIME+WAVE-TIME_RAMP2WAVE_SUM)THEN !RAISETIME小于等于CTIME(I)<RAISETIME+WAVE-TIME_RAMP2WAVE_SUM
ELSEIF(CTIME(I) .GE. RAISETIME .AND. CTIME(I) .LT. RAISETIME+WAVE-TIME_RAMP2WAVE_SUM)THEN !RAISETIMEС�ڵ���CTIME(I)<RAISETIME+WAVE-TIME_RAMP2WAVE_SUM
DELT(I)=DELT(I-1)*1.0005
IF(DELT(I) .GE. WAVESTEP)THEN
DELT(I)=WAVESTEP
ENDIF
SOURCE(I)=AMP !1.0D0
ELSEIF(CTIME(I) .GE. RAISETIME+WAVE-TIME_RAMP2WAVE_SUM .AND. CTIME(I) .LT. RAISETIME+WAVE)THEN !RAISETIME+WAVE-TIME_RAMP2WAVE_SUM小于等于CTIME(I)<RAISETIME+WAVE
ELSEIF(CTIME(I) .GE. RAISETIME+WAVE-TIME_RAMP2WAVE_SUM .AND. CTIME(I) .LT. RAISETIME+WAVE)THEN !RAISETIME+WAVE-TIME_RAMP2WAVE_SUMС�ڵ���CTIME(I)<RAISETIME+WAVE
DELT(I)=DELT(I-1)*0.9995
IF(DELT(I) .LE. RAMPSTEP)THEN
DELT(I)=RAMPSTEP
tem3dfdtd/lib/tixing-source.f90
+4 -4
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
SUBROUTINE TIXING_SOURCE
USE CONSTANTPARAMETERS
@@ -47,6 +47,6 @@ SUBROUTINE TIXING_SOURCE
WRITE(9,'(3E24.16E3)')CTIME(I),DELT(I),SOURCE(I)
ENDDO
CLOSE(9)
WRITE(10005,*)'梯形波发射波形时间序列已经写入文件CTIME_TIXING.DAT'
WRITE(10005,*)'���β����䲨��ʱ�������Ѿ�д���ļ�CTIME_TIXING.DAT'
RETURN
ENDSUBROUTINE TIXING_SOURCE
tem3dfdtd/lib/triangle-source.f90
+4 -4
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
SUBROUTINE TRIANGLE_SOURCE
USE CONSTANTPARAMETERS
@@ -26,6 +26,6 @@ SUBROUTINE TRIANGLE_SOURCE
WRITE(9,'(3E24.16)')CTIME(I),DELT(I),SOURCE(I)
ENDDO
CLOSE(9)
WRITE(10005,*)'三角发射波形时间序列已经写入文件CTIME_TRIANGLE_SOURCE.DAT'
WRITE(10005,*)'���Ƿ��䲨��ʱ�������Ѿ�д���ļ�CTIME_TRIANGLE_SOURCE.DAT'
RETURN
ENDSUBROUTINE TRIANGLE_SOURCE
tem3dfdtd/lib/write-rec-files.f90
+3 -3
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
subroutine WriteRecFiles(num)
use constantparameters
tem3dfdtd/lib/zero.f90
+3 -3
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
SUBROUTINE ZERO
USE CONSTANTPARAMETERS
tem3dfdtd/main.f90
+5 -5
查看文件
@@ -1,13 +1,13 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
! This is a finite difference time domain (FDTD) code for the simulation of transient electromagnetic (TEM);
! This code is designed to be used in semi_airborne TEM with a loop source;
! This code is written by Huaifeng Sun (sunhuaifeng@gmail.com) and Xushan Lu (luxushan@gmail.com), The conformal mesh part is written by Xinyu Li (202335098@mail.sdu.edu.cn) and Qi Zhao(zhaoqi_326326@163.com);
! This code is written by Huaifeng Sun (sunhuaifeng@email.sdu.edu.cn) and Xushan Lu (luxushan@gmail.com), The conformal mesh part is written by Xinyu Li (202335098@mail.sdu.edu.cn) and Qi Zhao(zhaoqi_326326@163.com);
! OpenACC API is used in this code for the acceleration with GPU device; therefore, you are recommended to compile this code with --
! --PGI Accelerator Fortran Workstation compiler. A Nvidia GPU card with CUDA capability is required if you want to run this code in parallel mode.
! Nobody is allowed to copy or distribute this code to people outside of TDEM.org group without the permission from Prof. Xiu Li (lixiu@chd.edu.cn)--
! Nobody is allowed to copy or distribute this code to people outside of https://git.em3d.cn/ group without the permission from Prof. Xiu Li (lixiu@chd.edu.cn)--
! --or you will be
! Contact the author for more detailed information.
tem3dfdtd/module/Precision.f90
+1 -1
查看文件
@@ -1,4 +1,4 @@
!Copyright (c) 2022 by LEEE under guide of Huaifeng Sun(sunhuaifeng@gmail.com)
!Copyright (c) 2022 by LEEE under guide of Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn)
!written by Qi Zhao(zhaoqi_326326@163.com)
MODULE Precision
USE ISO_FORTRAN_ENV, ONLY : i1k => INT8, i2k => INT16, i4k => INT32, i8k => INT64, &
tem3dfdtd/module/VTK_fix_header.f90
+1 -1
查看文件
@@ -1,4 +1,4 @@
!Copyright (c) 2022 by LEEE under guide of Huaifeng Sun(sunhuaifeng@gmail.com)
!Copyright (c) 2022 by LEEE under guide of Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn)
!written by Qi Zhao(zhaoqi_326326@163.com)
MODULE vtk_fix_header
USE Precision, ONLY : i4k
tem3dfdtd/module/VTK_fortran.f90
+1 -1
查看文件
@@ -1,4 +1,4 @@
!Copyright (c) 2022 by LEEE under guide of Huaifeng Sun(sunhuaifeng@gmail.com)
!Copyright (c) 2022 by LEEE under guide of Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn)
!written by Qi Zhao(zhaoqi_326326@163.com)
! --------------------------------Subroutine part---------------------------------------------!
tem3dfdtd/module/constant-parameters.f90
+3 -3
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
MODULE CONSTANTPARAMETERS
INTEGER NX,NY,NZ
tem3dfdtd/module/electromagnetic-variables.f90
+3 -3
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
MODULE ELECTROMAGNETIC_VARIABLES
REAL(KIND=8), DIMENSION(:,:,:), ALLOCATABLE:: EX,EY,EZ !The x,y and z component of electric field in 3 dimensions
tem3dfdtd/module/pml-parameters.f90
+3 -3
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
!The PML part follows the CPML scheme of Roden & Gedney (2000), integrated by the
!author of the PML version (tem3dfdtd_第二版), with tuned parameters:
!sig_x_max=1.0D2, alpha_x_max=1.0D-1, kappa_x_max=1.0 (RESTORED to the EXACT
tem3dfdtd/module/resistivity-model-parameters.f90
+3 -3
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
MODULE RES_MODEL_PARAMETER
REAL(KIND=8), DIMENSION(:,:,:), ALLOCATABLE:: CCSIG,CCSIGX,CCSIGY,CCSIGZ !The conductivity in each grid
tem3dfdtd/module/time-parameters.f90
+3 -3
查看文件
@@ -1,6 +1,6 @@
!Copyright (c) 2013 by tdem.org under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@gmail.com) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ tdem.org or sunhuaifeng.com
!Copyright (c) 2013 by https://git.em3d.cn/ under guide of Xiu Li(lixiu@chd.edu.cn)
!written by Huaifeng Sun(sunhuaifeng@email.sdu.edu.cn) and Xushan Lu(luxushan@gmail.com)
!Code distribution @ https://git.em3d.cn/
MODULE TIME_PARAMETER
REAL(KIND=8), DIMENSION(:), ALLOCATABLE:: CTIME,DELT