initial

tem3dfdtd/example/input.xml

@@ -0,0 +1,99 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Version 1.0-->
+<model>
+  
+  <!--!this is the configuration type for the modeling-->
+  <!--!airborne, semi-airborne, ground, surface-borehole,
+    tunnel, marine are the options-->
+  <configuration>SEMI</configuration>
+
+  <source>
+    <source_length>3</source_length>
+    <source_type>loop</source_type>
+    <current>1.0</current>
+    <Tx_waveform>TIXING_UPCOS</Tx_waveform>
+  </source>
+  <cell>
+    <x>161</x>
+    <y>161</y>
+    <z>160</z>
+    <mini_size>0.5</mini_size>
+  </cell>
+
+  <!--This is the time parameters in the iteration. -->
+  <!--the total_time corresponds to the computation time from 0 to the end-->
+  
+  <time>
+    <total_time>30.002</total_time >
+    <raise_time>1e-6,1e-9</raise_time >
+    <ramp_time>1e-6,1e-9</ramp_time>
+    <on_time>1.0e-2</on_time>
+    <off_time_step_max>1.0e-7</off_time_step_max>
+    <max_stop_iteration>3500000</max_stop_iteration>
+  </time>
+
+  <Rx_parameters>
+    <num_record_height>2</num_record_height>
+    <heights>0.5,1</heights>
+    <rec_flag>HE</rec_flag>
+    <Rx_lines_num>1</Rx_lines_num>
+    <Rx_range>66,96</Rx_range>
+  </Rx_parameters> 
+  
+  <resistivity_parameters>
+    <background>0.01</background>
+    <abnormal>
+      <number>6</number>
+      <block1>
+        <x_range>1,161</x_range>
+        <y_range>1,161</y_range>
+        <z_range>1,80</z_range>
+        <conductivity>1e-4</conductivity>
+      </block1>
+
+      <block2>
+        <x_range>1,161</x_range>
+        <y_range>1,161</y_range>
+        <z_range>80,81</z_range>
+        <conductivity>0.002</conductivity>
+      </block2>
+
+      <block3>
+        <x_range>1,161</x_range>
+        <y_range>1,161</y_range>
+        <z_range>81,83</z_range>
+        <conductivity>0.0033</conductivity>
+      </block3>
+
+      <block4>
+        <x_range>76,86</x_range>
+        <y_range>76,86</y_range>
+        <z_range>86,92</z_range>
+        <conductivity>0.02</conductivity>
+      </block4>
+
+      <block5>
+        <x_range>76,86</x_range>
+        <y_range>76,86</y_range>
+        <z_range>82,98</z_range>
+        <conductivity>0.033</conductivity>
+      </block5>
+
+      <block6>
+        <x_range>76,86</x_range>
+        <y_range>76,86</y_range>
+        <z_range>98,106</z_range>
+        <conductivity>0.05</conductivity>
+      </block6>
+      
+    </abnormal>
+     
+    
+  </resistivity_parameters>
+  
+
+
+
+
+
+</model>